Here you will find a selection of our latest highlights:
RJ45 Interface Protector
The TTLan® Interface Protector protects expensive mobile devices with LAN connection from being damaged by unintentionally pulling the network cable out of the port if its length and reach are over-estimated.
The protector is switched between port and device and releases the connection from its RJ45 interface as soon as a certain tensile force is reached. This prevents damage to the board, bent contacts or even ripping out of the RJ45 jack of the connected device.
The maximum tensile force that triggers a break in the connection is below the standard specifications for RJ45 connectors according to IEC 60603-7. This ensures that the connection between the device and the protector is first released. However, the tensile force of the protector is sufficiently high to prevent a premature release of the connection at low tensile forces.
The TTLan® Interface Protector is versatile and can be switched literally anywhere between the telecommunication port, the connection cable and the active device.
Connector A: RJ45 Jack (with dust cap)
Material: Housing: zinc alloy
Contacts: 50µ gold plating
Connector B: RJ45 Plug (with locking lever protection)
Material: Contacts: 50µ gold plating
Wiring: 1:1, T568B
Housing: Plastic ABS 94V0, white
Cable: S/FTP AWG 27/7, 20 cm, LSOH
Plug and jack: IEC 60603-7-51
PoE+ : IEC60512-99-001:2012 (Ed.1.0)
Insertion force: < =30N
Mating cycles: ~ 750
Operating temperature: -25°C up to +50°C
Storage temperature: -40°C up to +70°C
Current rating: 1.5A
Dielectric withstanding voltage: 1000V AC 60Hz
Insulation resistance: 20 MΩ (max.)
Steel-Armoured HDMI 2.0 Active Optical Cable
Very strong and durable • high performance • brillant images
The steel-armoured HDMI Active Optical Cable is a very strong video hybrid cable of OM3 fibres and a copper wire. It is lightweight and characterized by a flexible cable with a very small bending radius. It offers the best performance on long distances and very high load capacity.
Under a flexible TPU jacket, the cable is equipped with a steel armouring and an additional Kevlar mesh; a combination that makes it extremely resistant to pressure and tensile loads, bruises and damage from rodent bites. The cable can withstand a short-term pressure of up to 200kg without performance losses or damages of the inner conductors.
The steel-armoured HDMI Active Optical Cable is assembled with two HDMI type A plugs, which are protected with a high-quality metal housing.
This results in an excellent transmission of video signals and a crystal clear image without loss over long distances up to 100 meters. The Active Optical Cable supports HDTV and 3D Full HD resolutions at a transfer rate of up to 18 Gbps.
▪ Up to 100 m length (max.)
▪ Low power consumption: 250mW (max.)
▪ HDMI 2.0 Ultra HD 4K 2160p
▪ Data Rate up to 18 Gbps (Six Gbps per channel)
▪ Plug and Play
▪ Supports HDCP1.4 and HDCP2.2
▪ Self-detecting function for EDID information
▪ No loss of signal – delivering crystal clear digital images
▪ Hybrid optical cable with fibre and copper wire
▪ Crush Resistance – Short term 200kg; Long term 100kg
▪ ROHS2.0 and REACH compliant
▪ Digital Signage
▪ Rental Business
▪ Medical Imaging Equipment
▪ Airplane On-board video system
▪ Home Theater
▪ TV broadcast station
▪ Conference room video equipment
▪ Security systems
Steel-armoured Cat.6A Patch Cable
Steel-armoured Cat.6A Patch Cable - thin, reliable, durable
The new, steel-armoured Cat.6A patch cable from TTL Network has a diameter of just 3.8 mm. It is 45% smaller than other comparable patch cords, it also takes up half the space in server cabinets. The steel-armoured patch cable ensures high packing density and tidy cable management in many applications - including rodent protection!
Due to its small cable diameter and the special construction of the steel jacket, the steel armoured Cat.6A patch cable from TTL Network offers even more advantages: It is extremely flexible and allows a much smaller bending radius than a standard patch cable. The smooth surface reduces cable clutters and ensures improved air circulation and cooling in the server cabinet.
With these good qualities the steel-armoured Cat.6A patch cable is perfectly suited for use in industrial environments, in the home office or in test or storage rooms. Even at events because the thin patch cord is inconspicuous and proves to be very resistant: it easily withstands frequent stresses.
For rodent protection applications, TTL Network's new steel armoured patch cables are also reliable: The metallic armouring of the Cat.6A cable protects against rodent attacks at all times.
Optimum conductivity is ensured by the two RJ45 plugs: their 50 micron gold plating protects them against oxidation or corrosion, thus preventing signal losses. Each of the steel-armoured Cat.6A patch cables has been tested in the Cat.6A Channel, and the test protocols are included.
▪ Cable sheathing made of stainless steel SUS304
▪ Outer Diameter: 3.8 mm / Colour: dark grey
▪ Cable: Copper / Cat.6A STP 4x2x AWG32/7
▪ 2x RJ45 Plugs: 8P8C 50µ gold plated/shielded
▪ Connector molding and hood, black
▪ Grommet with latch protection/black
▪ 10 GBit / 500 MHz
▪ Cat.6A Channel tested (test protocol is included with each cable)
▪ Available lenghts: 0.15 / 0.25 / 0.5 / 1.0 / 2.0 m
▪ Home Office
▪ Test rooms
▪ Industrial environments
▪ Storage rooms
Active Optical Cables
NEW: HDMI D Active Optical Cable features non-directional pluggable HDMI A and DVI D adapters
The HDMI D 2.0 AOC hybrid cable is an optical Plug & Play cable which can be adapted to various applications with HDMI A and DVI D plugs. It transfers HDMI and DVI signals without any loss over distances up to 100 meters.
Equipped with slim, compact plugs, and a flexible cable it is perfectly suited for a lot of AV installations. A cable pulling capsule is further useful to pull the cable undamaged through conduits.
The HDMI A and DVI D adapters are not directional and can be plugged on both sides. The adapters are simply pushed onto the HDMI D connectors and fixed with a screw.
DisplayPort 1.2 Active Optical Cable
This Active Optical Cable - equipped with DiplayPort plugs - enables the transmission of high-resolution multimedia signals uncompressed without any loss over distances up to 100 meters.It supports highest image resolutions of 3840 x 2160 and 4096 x 2160 and best audio quality.
The cable is coated with a high-quality flexible LSZH material which meets the best requirements for fire retardance.
Professional AV systems
Digital Signage systems
Home Theatre systems
Supported Image Resolution: 4K / 60 Hz, 3840 x 2160 + 4096 x 2160
Transmission: Supports up to 21.6 Gbps data rate with 5.4 Gbips/lane (HBR2) link rate
Supports up to 8 channels of 16 or 24 bits linear PCM and 32 192 KHz sampling rate
Device Compatibility: HDCP, EDID, DPCP
Reduced EMI / RFI values
Plug & Play
High pulling strength, crush load resistance, and compression load
Low power consumption
Cable Material: IEC LSZH (Low Smoke Zero Halogen)
Looking for further types of Active Optical Cables? Click here: Flyer
HDBaseT Cat.6A UltraFlex Patch Cable
TTLan® HDBaseT 5Play Cat.6A S/FTP UltraFlex Patch Cable
The TTLan® HDBaseT 5Play patch cable ensures excellent transmission quality for short and long transmission distances from 0.5 to 30 meters - even with high-resolution 4K image quality.
The patch cable allows fast and direct connection of the HDBaseT hardware. RJ45 connectors are fitted with specially designed triple blade contacts. In combination with the rigid inner conductor of the cable, they ensure a reliable connection.
The overmold of the connectors ensures a firm strain relief and thus for a reduction of cable damage due to mechanical stress.
The cable sheath material is flexible, UV and oil resistant, flame retardant, and makes the cable highly resistant to stress. These properties make it ideally suited for applications in industrial and outdoor environments.
▪ Cat.6A S/FTP 4x2x AWG23/1 OD: 6.0 mm
▪ Cable sheath material: TPE (thermoplastic elastomer) black
▪ Ultraflexible and durable cable
▪ Triple Blade RJ45 plugs with 50µ gold plating
▪ Connector molding and hood, black
▪ Cat.6A channel tested (test protocol is included with each cable)
▪ UL E499958
▪ Flame retardant jacket material
▪ High temperature insensitivity of the raw cable: Up to +105°C
▪ Available lenghts: 0.5 to 30 Meter
▪ Industrial environments
▪ Conference rooms
▪ Hospitals, surgeries
▪ Airports, shopping centers
▪ Stations, public facilities
▪ Security systems
EMI-SAFE - TTL Network patent
The safe for DVI connections
With our EMI-SAFE we have developed a new patented clip system for electromagnetically compatible connections. Two symmetrical housing shells surround the connection like a safe. Hereby, the shells interlock by a sophisticated precisely fitting tooth system and form a closed unit. As a result, the housing construction provides a 360° EMC shielding.
Usually, modular housings in conjunction with a connector contain a lot of components. This leads to a complex, and cost-intensive production. Whereas, EMI-SAFE is constructed in only two identical shells which realize a EMC proof housing for DVI connectors, including the possibility for a reassembly.
The housing shells of EMI-SAFE are made of high-quality, conductive zinc die-casting that makes them extremely stable and durable. Further, geometry and material thickness of the shells are absolutely identical. This does not lead to any leaks in the seam area.
For EMI-SAFE are three different cable outlets available:
8.8 mm cable diameter
10.9 mm cable diameter
12 mm cable diameter
During the assembly, the plug is firmly fixed in the housing by means of a clip, without the need for soldering or the use of tools. Now, the housing shell is tightly closed by the patented tooth system – and can be easily opened again for an error correction.
EMI-SAFE has been developed and patented in closed collaboration with a German engineer, and is also produced in Germany.
TTLan Cat.6A Keystone Jack component certified
Eeasiest assembly, best performance, perfect price
TTLan® Cat.6A Keystone Jack by TTL Network
The new TTLan® Cat.6A keystone jack, and an AWG22 - AWG26 cable – more is not required to perform a quick, and reliable assembly. For the new jack by TTL Network is to be assembled mounting-friendly without any tool. Further, it provides an ideal slime line design: Its special compact keystone formate of 19.2 x 14.7mm even enables a triple-loading in 50 x 50 mm plates.
In daily use, the high performance of the TTLan® Cat.6A keystone jack just appears – not only the excellent transmission features of 500 MHz and 10GBit that are tested and certified by the leading accredited test laboratory GHMT. Certificate
Also due to the 360° shield connection that guarantees perfect protection of electromagnetic compatibility (EMC). Its design capability enables many individual applications. The zinc die-cast housing is compatible with with all common face plates. An additional advantage is the very attractive price-performance ratio.
TTlan HDBaseT UltraFlex Cable
S/FTP CAT.7 | 1000 MHz | 4 x 2 x AWG 23/1 | FRNC SOFT | HALOGEN-FREE
TTLanTM UltraFlex HDBaseTTM 5PlayTM Cat.7 Special Cable provides data transmission without any loss up to 500 meters
HDBaseTTM 5PlayTM serves the transmission of multimedia signals in high resolution, and power supply with one single Ethernet LAN cable. Our TTLanTM UltraFlex HDBaseTTM 5PlayTM cable has been developed especially for long transmission distances. Its flexible high-quality material as well as its transmission characteristics are far above the usual standard of conventional HDBaseT cables. It transfers reliably video, audio, 10GBaseT, and control signal in high resolution without any loss, and power supply (PoE+, PoH) up to 100 watts
The outer jacket is made of a special FRNC soft material, and is significantly more flexible compared to standard Cat.7 and halogen-free cables.
Inner conductor: 4x 2x AWG 23/1 / 100% bare copper / S/FTP Cat.7 / 1000 MHz
Outer jacket: Halogen-free, flexible compound FRNC soft
Outer diameter: 7.6 ± 0.2 mm
Temperature range: -30°C to +70°C (fixed)
Max. tractive force: 105N
IEEE 802.3: Ethernet 10Base-T, 100Base-T, 1000Base-T, 10GBase-T
IEEE 802.5: ISDN, FDDI, ATM, Cable Sharing
IEEE 802.3at: PoE, PoE+, PoH upt to 100W, video, audio, and control signals
The TTLanTM UltraFlex HDBaseTTM 5PlayTM Cat.7 cable is available in two lengths:
100 M (ring)
500 M (drum)
The network isolator is used for galvanic isolation in Ethernet networks and protection of highly sensitive systems against external influences, such as voltage damages or short-circuits.
Ageing processes, installation faults, lightning or humidity – all those scenarios may cause an electrical connection between copper-based network cabling and connected devices, which leads to potential differences, and, in the end, to device damages as a result of overvoltage.
Intermediated between the devices, our network isolator serves for preventing devices and users from transient overvoltage up to 4kV.
Many test organisations require galvanic isolation within the framework of security certification – in particular for the medical industry. However, network galvanic isolators are increasingly used in industry and aerospace, but also in private homes. Our new RJ45 network isolator provides an excellent topology: It galvanically isolates Ethernet networks IEE803.2 10/100/1000 Base T according to EN 60601-1.
The TTL network isolator is equipped with a RJ45 socket, a cable length of 15 centimeters and a shielded RJ45 plug. Moreover, the network isolator convinces with its flame retarding housing.
With all these properties, the TTL network isolator is ideally suitable for the protection of patients from dangerous rays by usage of medical devices as well as to the prevention of electrical hum or overvoltage. In metrology it is used to protect against external and interference voltage, and in audio technology against network hum.